Mobile and Remote Asset Monitoring & Controls
XT-2160G is a fully integrated tracking device for communicating mobile asset location information to owners via ubiquitous UMTS networks. With an integrated GPS engine, embedded cellular, PCS and GPS antennas, XT-2160G is a cost effective solution for monitoring vital location data for remote assets.
XT-2160G provides 2 all purpose digital inputs and 1 internal analog input used to monitor battery voltage. In addition to multiple inputs, XT-2160G provides a digital output that can drive ignition relays.
XT-2160G has an optional external GPS connector for instances where higher GPS sensitivity is required. With it’s compact design, XT-2160G can be covertly installed in tight locations.
With its highly mature firmware, XT-2160G supports TCP, UDP, FTP and is capable of firmware update and configuration over-the-air.
|3G UMTS/HSDPA/HSUPA Characteristics|
|3GPP Release 6 HSPA|
- Band I–2100MHz - Band IV–1700 MHz
- Band II–1900MHz - Band V–850 MHz
- Band II–1800MHz - Band VIII–900 MHz
|WCDMA/HSDPA/HSUPA Power Class 3|
|PS (Packet Switched) Data Rate
- HSUPA category 6, up to 5.76 Mb/s UL
- HSDPA category 8, up to 7.2 Mb/s DL
- WCDMA PS data up to 384 kb/s DL / UL
|CS (Circuit Switched) Data Rate
- WCDMA CS data up to 64 kb/s DL / U
|D.C. Power||10 – 16 V|
|Case Material||ABS plastic|
|Dimensions||2.0” X 1.8” X 1.0”|
|Weight||< 2 oz.|
|Operating Temp.||-30°C to +70°C|
|Storage Temp.||-30°C to +70°C|
|Receiver Tracking Sensitivity||-161 dBm|
|Accuracy||+/- 2.5m CEP|
|Cold Start||< 33 sec|
|Hot Start||< 1 sec|
|Power and input/output
- 14 pin Micro Fit Connector